| range of product | Altivar Machine ATV340 |
|---|---|
| product or component type | Variable speed drive |
| product specific application | Machine |
| variant | Standard version |
| mounting mode | Cabinet mount |
| communication port protocol | Modbus serial Ethernet/IP Modbus TCP |
| option card | Communication module, Profibus DP V1 Communication module, Profinet Communication module, DeviceNet Communication module, CANopen Communication module, EtherCAT |
| network number of phases | 3 phases |
| supply frequency | 50...60 Hz +/- 5 % |
| [Us] rated supply voltage | 380...480 V - 15...10 % |
| nominal output current | 4.0 A |
| motor power kW | 2.2 kW for normal duty 1.5 kW for heavy duty |
| motor power hp | 3 hp for normal duty 2 hp for heavy duty |
| EMC filter | Class C3 EMC filter integrated |
| IP degree of protection | IP20 |
| discrete input number | 5 |
|---|---|
| discrete input type | PTI programmable as pulse input: 0…30 kHz, 24 V DC (30 V) DI1...DI5 safe torque off, 24 V DC (30 V), impedance: 3.5 kOhm programmable |
| number of preset speeds | 16 preset speeds |
| discrete output number | 2.0 |
| discrete output type | Programmable output DQ1, DQ2 30 V DC 100 mA |
| analogue input number | 2 |
| analogue input type | AI1 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bits AI1 software-configurable temperature probe or water level sensor AI1 software-configurable voltage: 0...10 V DC, impedance: 31.5 kOhm, resolution 12 bits AI2 software-configurable voltage: - 10...10 V DC, impedance: 31.5 kOhm, resolution 12 bits |
| analogue output number | 2 |
| analogue output type | Software-configurable voltage AQ1: 0...10 V DC impedance 470 Ohm, resolution 10 bits Software-configurable current AQ1: 0...20 mA impedance 500 Ohm, resolution 10 bits |
| relay output number | 2 |
| output voltage | <= power supply voltage |
| relay output type | Relay outputs R1A Relay outputs R1C electrical durability 100000 cycles Relay outputs R2A Relay outputs R2C electrical durability 100000 cycles |
| maximum switching current | Relay output R1C on resistive load, cos phi = 1: 3 A at 250 V AC Relay output R1C on resistive load, cos phi = 1: 3 A at 30 V DC Relay output R1C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC Relay output R1C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC Relay output R2C on resistive load, cos phi = 1: 5 A at 250 V AC Relay output R2C on resistive load, cos phi = 1: 5 A at 30 V DC Relay output R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC Relay output R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC |
| minimum switching current | Relay output R1B: 5 mA at 24 V DC Relay output R2C: 5 mA at 24 V DC |
| physical interface | 2-wire RS 485 |
| connector type | 3 RJ45 |
| method of access | Slave Modbus RTU Slave Modbus TCP |
| transmission rate | 4.8 kbit/s 9.6 kbit/s 19.2 kbit/s 38.4 kbit/s |
| transmission frame | RTU |
| number of addresses | 1…247 |
| data format | 8 bits, configurable odd, even or no parity |
| type of polarization | No impedance |
| 4 quadrant operation possible | True |
| asynchronous motor control profile | Constant torque standard Optimized torque mode Variable torque standard |
| synchronous motor control profile | Permanent magnet motor Reluctance motor |
| pollution degree | 2 conforming to EN/IEC 61800-5-1 |
| maximum output frequency | 0.599 kHz |
| acceleration and deceleration ramps | Linear adjustable separately from 0.01...9999 s S, U or customized |
| motor slip compensation | Adjustable Not available in permanent magnet motor law Can be suppressed Automatic whatever the load |
| switching frequency | 2...16 kHz adjustable 8...16 kHz with derating factor |
| nominal switching frequency | 4 kHz |
| braking to standstill | By DC injection |
| brake chopper integrated | True |
| line current | 5.1 A at 380 V (normal duty) 4.1 A at 480 V (normal duty) 6.0 A at 380 V (heavy duty) 4.9 A at 480 V (heavy duty) |
| line current | 6 A at 380 V without line choke (heavy duty) 4.9 A at 480 V without line choke (heavy duty) 5.1 A at 380 V with external line choke (normal duty) 4.1 A at 480 V with external line choke (normal duty) 3.5 A at 380 V with external line choke (heavy duty) 2.8 A at 480 V with external line choke (heavy duty) |
| maximum input current | 6.0 A |
| maximum output voltage | 480 V |
| apparent power | 3.8 kVA at 480 V (normal duty) 4.1 kVA at 480 V (heavy duty) |
| maximum transient current | 6.2 A during 60 s (normal duty) 6 A during 60 s (heavy duty) 7.6 A during 2 s (normal duty) 7.2 A during 2 s (heavy duty) |
| electrical connection | Screw terminal, clamping capacity: 1.5...4 mm² for line side Screw terminal, clamping capacity: 4...6 mm² for DC bus Screw terminal, clamping capacity: 1.5...4 mm² for motor Screw terminal, clamping capacity: 0.2...2.5 mm² for control |
| prospective line Isc | 5 kA |
| base load current at high overload | 4.0 A |
| base load current at low overload | 5.6 A |
ID
