| range of product | Altistart 01 |
|---|---|
| product or component type | Soft starter |
| product destination | Asynchronous motors |
| product specific application | Simple machine |
| device short name | ATS01 |
| network number of phases | 3 phases |
| [Us] rated supply voltage | 380...415 V - 10...10 % |
| motor power kW | 4 kW, 3 phases at 380...415 V |
| IcL starter rating | 9 A |
| utilisation category | AC-53B conforming to EN/IEC 60947-4-2 |
| current consumption | 45 A at nominal load |
| type of start | Start with voltage ramp |
| power dissipation in W | 4 W at full load and at end of starting 94 W in transient state |
| assembly style | With heat sink |
|---|---|
| function available | Integrated bypass |
| supply voltage limits | 342…456 V |
| supply frequency | 50...60 Hz - 5...5 % |
| network frequency | 47.5...63 Hz |
| output voltage | <= power supply voltage |
| [Uc] control circuit voltage | Built into the starter |
| starting time | 1 s / 100 5 s / 20 10 s / 10 Adjustable from 1 to 10 s |
| deceleration time symb | Adjustable from 1 to 10 s |
| starting torque | 30...80 % of starting torque of motor connected directly on the line supply |
| discrete input type | Logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm |
| discrete input voltage | 24...40 V |
| discrete input logic | Positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA |
| discrete output current | 2 A DC-13 3 A AC-15 |
| discrete output type | Open collector logic LO1 end of starting signal Relay outputs R1A, R1C NO |
| discrete output voltage | 24 V (voltage limits: 6...30 V) open collector logic |
| minimum switching current | 10 mA at 6 V DC for relay outputs |
| maximum switching current | Relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load |
| display type | 1 LED (green) for starter powered up 1 LED (yellow) for nominal voltage reached |
| tightening torque | 0.5 N.m 1.9…2.5 N.m |
| electrical connection | 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit Screw connector - rigid 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit Screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit Screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit 4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit Screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit 4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit Screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit |
| marking | CE |
| operating position | Vertical +/- 10 degree |
| height | 124 mm |
| width | 45 mm |
| depth | 131 mm |
| net weight | 0.42 kg |
| compatibility code | ATS01N2 |
| Motor power range AC-3 | 4…6 kW at 380…440 V 3 phases |
| motor starter type | Soft starter |
ID
